Steampunkish pirate part 2

I thought I’d start with a pic of the costume as it stands now and then follow with a series of ‘how it’s built’ pics. I wanted to avoid cogs and keys - I love it on other people, you know the ones who make an enormous effort and look amazing, but I can’t afford the level of detail involved and I think just chucking a few cogs on stuff can easily look rubbish. Anyway it’s a subtle steampunkery I’m going for but feel free to offer any advice!

Starting with the petticoat and ruffly shirt (both from charity shops) and the bustle…

Then on with the skirt – this is also a charity shop skirt which has large pleated gores. I just tacked sections up at regular intervals to give it that pouffy look. The skirt was too big so I put a large pleat in the back too. This helps to accommodate the bustle but I think it needs a bit of attention or maybe something extra, like a silky red something with tassels draped around?

And from the front, ok it needs ironing!

Then a crazy tight cinch belt. That’s pure elastic folks, with velcro at the back and corset-look pleather at the front. Did I mention it’s tight? I have a 29 inch waist normally but in this thing? More like 25!

And then an extra added belt – this was really long so I cut out a section, unpicked the stitching, and re-sewed it back together much smaller.

A couple of cheeky side and bustle shots – is the bustle too big do you think?

And last but not least - a corset back waistcoat, my previously mentioned hat, and a little bag for my phone and cash. The waistcoat is from ebay and the bag from a charity shop.

Because I had some of the things in my to-do pile and stash, the whole thing cost me no more that £30.

I also have a pair of stripy plus-fours I found on ebay because, if you remember, I HAVE TO ROW A BOAT IN THIS! Oh dear, I think I might have trouble but do you know what? I’m gonna try! It’s for charity!

Beccy

Making a bustle pad, a little tutorial…

If you’ve ever made a cushion, making a bustle pad is easy! I need one for my steampunkish pirate costume so making one was the way to go. I made it from calico, ribbon and some thick wadding I had in my stash so it was cheap and only took about half an hour.

First measure around the back part of you hips and transfer this measurement to your chosen fabric. Then draw out your bustle shape, notice the slight curve on the side that will touch the body. Cut out two of these.

Then cut out your wadding. I used four layers of thick polyester quilt wadding in the end but you might want a bigger or smaller bustle so you can experiment when you come to stuff it. These must be about an inch smaller than your calico all round.

Next take a length of ribbon that is long enough to tie around your waist but with long ends for adjustment. Pin this along the straight edge of one of the pieces of calico. The ribbon will be on the inside when the bustle pad is finished.

Sew the ribbon on and then pin the long ends of the ribbon to the other side of the piece of calico. It is important to pin the ribbon well away from the edges so that they don’t get caught when you stitch the two pieces together.

Now pin the other piece of calico face down. You must make sure that the ribbon ends are on the inside of the sandwich but that the ribbon sewn along the edge is on the outside at this stage.

Now sew all around the edge, leaving a couple of inches open so you can insert your wadding.

Turn the whole thing inside-out and check your ribbon hasn’t got caught in any stitching. Press flat and insert your wadding. Before you sew up the hole it’s a good idea to try it on to see if you have enough or too much stuffing!

I sewed an extra row one inch from the flat side to help it sit better.

And you’re all done! I’ve seen some with an extra, smaller pad above the larger one. I’ve also seen some so elaborate you’d be happy to wear them outside your clothes (well, almost)

Mine is not beautiful, but it will do the job!

Beccy